ModeGate PLUS 413

מחיר רגיל 2,527.00 ₪

כולל מעמ

מוצר זה מאפשר לנו לעבוד בתצורת modbus ע״י שימוש ב tcp/ip .

דגם 413 מאפשר לנו לחבר 4 מוצרים בתקשורת modbus.

English

4 Port

A double port Modbus Gateway connects two serial Modbus devices via network. Also it allows for parameter adaption from a serial Modbus Master to a Modbus slave (convert ASCII-RTU, Bitrate)

Hardware Characteristics

With its metal case, a wide temperature range and a flexible DC power supply, the ModGate Plus classifies as an industrial-strength device. The product line is based on a state-of-the-art RISC processor, providing a cost-effective design and low power consumption.
The serial port can be configured to physically use RS232, RS422 or RS485, allowing the utilisation of multiple Modbus Slaves on a single serial line.

Operational Benefits

The ModGate Plus devices make Modbus operations independent of distance and OS platforms; they can be accessed and controlled via Internet and VPN connections.

The messages received on the network are sent to the destination serial line; replies from serial port are sent back across the network and vice versa. A ModGate Plus device functions automatically, whether a Modbus Master is on a serial port or on the TCP/IP network.

Modbus Master Multiplexing is implemented as an extension to the standard: Several Masters can connect to ModGate Plus using Modbus/TCP whilst slaves on serial lines may answer requests from multiple Masters.

The configuration of ModGate Plus is done via browser. The user interface is based on modern web technologies to allow for an easy navigation through the configuration options provided. Furthermore, UPnP provides a simple and standardized way to find the Gateway in the network.

Features
Converts between Modbus/RTU, Modbus/ASCII and Modbus/TCP over Ethernet, WLAN or Internet LAN 10/100 Fast Ethernet Configuration over Web interface Supports Modbus Master Multiplexing Supports TCP/IP, DHCP, ICMP, HTTP, DNS RS232/422/485 interface selected by Software Optional: Wireless network IEEE 802.11b/g/n

Specifications
Ethernet Interface
Speed/Type	100Mbps/10Mbps Auto-detecting
Connector	RJ45 (8P8C) 8 pin
LEDs	Power, WLAN, Ready, Ethernet Link / Speed

Serial Interface
No. of Ports/Type	4 × RS232/422/485 selected by software
Connector	DB-9 male
Protection	16kV ESD surge protection
Operating Modes	RS232 RS422 full duplex (120Ω on/off) RS485 4 wire, full duplex (120Ω on/off) RS485 2 wire, half duplex (120Ω on/off)
Configuration	Software sets operating mode and RS422/485 termination No High/Low biasing resistors needed
Signals	RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND RS422: Tx+/-, Rx+/-, GND RS485 4 wire: Tx+/-, Rx+/-, GND RS485 2 wire: Data+/-, GND
RS485 Data Direction control	ARTc (Automatic Receive Transmit control)
Data bits	7, 8
Stop bits	1, 2
Parity	None, Even, Odd
Baudrate	ModBus: up to 115.2 kbps RS232: 200 bps to 921.6/1000 kbps (physical) RS422/485: 200 bps to 3.7Mbps (physical)
LEDs	TxD/RxD for each port

Software
Installation	DIP switches set the device to DHCP or a defined fixed IP Address to be contacted via WEB Browser
Operating mode	Promiscous Mode Messages received from the network are sent to the serial port, messages from the serial port are sent to the connected network host. (Circuit Switching) Direct Mapping Mode Received messages are scanned for their target address. This address is found in the mapping table, the message is sent to the defined connection. (Packet Switching)
Network Protocols	Modbus/TCP, TCP/IP, DHCP, ICMP, HTTP, DNS, UDP, UPnP/SSDP
Serial Protocols	Modbus/RTU and Modbus/ASCII
Modbus Master Multiplexing	An extension to the standard. Slaves on serial lines may answer requests from multiple masters. The masters connect to ModGate Plus by Modbus/TCP.
Configuration	Configuration over WEB Browser
Detection	Announces presence in the network via Universal Plug and Play (UPNP) protocol
DNS	Domain Name Server support
Firmware	Firmware update over WEB Browser
Security	Webinterface is password protected. The password can be changed in the Webinterface.
USB 2.0	for logging/debugging

Wireless interface (option)
Standards	2.4GHz Radio, supports IEEE Std. 802.11b/g/n
WLAN Modes	Access Point (AP) or Client (Station)
TX Power	802.11b: Typ. 15.5dBm ±1.5 dBm @ 1Mbps (DSSS) Typ. 15.5dBm ±1.5 dBm @ 11Mbps (OFDM) 802.11g: Typ. 15.6dBm ±1.5 dBm @ 6Mbps (CCK) Typ. 13.5dBm ±1.5 dBm @ 54Mbps (OFDM) 802.11n: Typ. 13.4dBm ±1.5 dBm @ 6.5Mbps (OFDM) Typ. 13.3dBm ±1.5 dBm @ 150 Mbps(OFDM)
RX Sensitivity	802.11b: -95.6dBm @ 1Mbps, -88dBm @ 11Mbps 802.11g: -91.3dBm @ 6Mbps, -74.2dBm @ 54 Mbps 802.11n: -88.8dBm @ 6.5Mbps (20 MHz), -72dBm @ 72.2Mbps (20 MHz)
Transmission Rate	802.11b: 11Mbps 802.11g: 6 to 54Mbps 802.11n: 6.5 to 150Mbps
Transmission Distance	Up to 100m in open areas
Wireless security	WEP WPA WPA2 WPA2-Enterprise (IEEE 802.1X/RADIUS)
Antenna Connector	RP (Reverse-Polarity) SMA

Power Requirements
Input Voltage	9 - 54V DC
Power Consumption	0.25A @ 12V, 2.7W max
Connector	3-pin Terminal Block

Housing and Mounting
Case	0.8mm sheet metal
Weight	w/o box 0.25kg; w/h box 0.35kg
Dimensions	115×73×25 mm³ (W×L×H)
Packaged	150×107×48 mm³
Mounting	DIN-Rail (optional) Wall mount (optional)

Environmental Data
Operating Temp	−20°C - 65°C
Storage Temp	−20°C – 85°C
Ambient Humidity	5-95% non condensing

Standards
Declarations	CE, FCC
EMI	EN 55022 Class B EN 61000-3-2: Limits of harmonic current emissions EN 61000-3-3: Limitation of voltage changes 47 CFR FCC Part 15 Subpart B
EMS (EN 55024)	EN 61000-4-3: Radiated RFI EN 61000-4-4: Electrical Fast Transient EN 61000-4-5: Surge EN 61000-4-6: Induced RFI EN 61000-4-8: Power Frequency Magnetic Field EN 61000-4-11: Power supply dips
ESD	EN 61000-4-2 4kV contact 8kV air for Serial Port USB Ethernet DC Power connector

MTBF (Mean Time Between Failures)
MTBF	41.5 Years @ 25°C 13.5 Years @ 45°C
Standard	Telcordia (Bellcore) Standard; RelCalc. 5.0 BELL-7

Warranty
Warranty Period	2 years

מפרט טכני

לחץ כאן להורדת מפרט טכני מלא - modgate plus 413

מדריך להתקנת מוצרי modogate plus